Ivan Turbinca
Well-Known Member
I am having a problem with the way the three glass panels that have the diagonal cut at the top will be installed, I am not sure how well they will align as the the angle of the stairs is ~44 degrees while the angle of the cut will be ~56 degrees. Considering the geometry of my stairs, if I align them, the resulting distance distance between two panels must be 5.261". The code says no more than 4" between two spindles. How do they even sell this when they will fit a particular geometry only (or a small range) Here is how I calculated the above
Use this calculator to check the maths Calculation of the right triangle b=8 B=56.671 the 56.671 angle was calculated based on the panel drawing for a triangle of 152x127x83.516
Here is my design
Here is the product I am planning to use Colonial Elegance Verona Glass Balustrade Panel - 40° Angle Stair Section - 39 3/8-in L x 6-in W x 3/8-in T
Here are the specs from the manufacturer
Use this calculator to check the maths Calculation of the right triangle b=8 B=56.671 the 56.671 angle was calculated based on the panel drawing for a triangle of 152x127x83.516
Here is my design
Here is the product I am planning to use Colonial Elegance Verona Glass Balustrade Panel - 40° Angle Stair Section - 39 3/8-in L x 6-in W x 3/8-in T
Here are the specs from the manufacturer