Wood look tile planks have a curl to them due to the firing. The longer the worse it can be. So you want to stagger them at the 25 - 30% range. If...
Paint is not a vapor retarder.
I hate it when the paper won't peel off right and your fingers get all sticky. Luckily I haven't touched the stuff in a decade at least.
OMG! LOL You need a regular sized van son. How do you find anything in there? I use a quad cab 3/4 ton dodge ram long bed 4x4 with a shell on the bed.
What's the temp down there? Not much is going to penetrate that waxy paper. Maybe throw a box in the oven at a low setting. Or microwave one a few...
Well you have to keep in mind building code for stairs. So you may have to go all the way down on the risers.
Just got back from Maui. [ATTACH] [ATTACH] [ATTACH]
I glue and nail them we with a 15ga nailer. Never lost a client yet.
Can you build out both sides?
It flexes. You don't want it rigid.
Engineered moves more in length, solid move more in width. Glue down engineered over concrete really won't move much at all. At transitions with...
Right, should be no movement. I wonder what size trowel they used.
If ya got enough mud underneath the levelers then there should be no hollow spots.
Tempting Jon. But your property values are too high.
Congrats Daris. I'm only at around 40- 41 years installing. Jon, I'll trade you some ocean front property in AZ! Just gotta wait till California...
Thats a tough call. To find out I would cut out a section where it pops to determine the issue. Otherwise I'd say the fiberock isn't sticking to...
Are you going to sand and finish it? If so ask your floor guy. Theres plenty of fillers out there for that.
It's just going to happen on solid. Typically on an unfinished solid sand an finish job installers use a filler, then sand it off so the gap is...
Both of those are already federal crimes. Ted's an idiot.
Had that issue, I found the installers didn't screw the track all the way across and left two screw holes open.
Separate names with a comma.