highup's latest activity

I think he didn't want to put in transition strips in the hall opening or openings. I would have played it out lengthwise too. It was...

Here's the big one I measured Friday. I just did some calculations. Measuring to 3 important areas, to the front door, to the top of the...

Here's a not to scale quickie sketch of part or the place. Looking to the right side, you see the hallway. From the dining room, you can...

The layout had a 19 foot hallway, 3 feet wide. The plank layout ended up going the short direction. The installer said he did the...

I use graph paper and if a wall length is 26' 4 3/16", then that's exactly what I write down. I can add or round up later. My drawings...

Two jobs, one my measure, the second, was the shop owner.....ran a little short. Same product. Mine was about 1200sq feet. The product...

The customer has a Bauer unit and spent 3+ hours with it. Did good, but it was slow. It still needs another 1/8 or more removed in the...

Man, I’m looking at houses in 55+ communities, and I like them. When the hell did I become old?

Starting with Mr Potato head. 😁

I measured a very nice large home on Friday. It's going to have a wide plank LVP throughout. After drawing the layout, I went around...

The Makita is 8 1/4. I did a little grinding inside to make the 8 1/2" fit..... Because I got two nice 8 1/8 inch tri-chip blades at...

That's great to hear. 👍

Go get your own! 😁 Probably going to need a time machine. 🤣