I'll need to borrow a stretcher that works with the cotton head the store purchased.
There was a job done recently and there were a few problems, so the shop want's me to go do some fine tuning to make the customer happy.
Daris, this is the job I called you about a few weeks ago. It was 3 bedroom, a hall and stairs with a center landing.
I went down with the store owner to see how bad it looked. Not as bad as what I was expecting. He tried to tuck too much in the gully in some spots. The tackstrip was a bit too far from the wall to, but that ain't gonna get redone. He cut too deep when reliving a corner and a couple loops were damaged. The bottom stair needs a couple small brads to flatten out an exposed edge. This was a rough job because of the thin and flat woven material, but the installer should have gone back the following day to do some fine tuning after his blood pressure was back to normal.
I'll have a few hours there and do what I can to make the customer happy.